 | Maximum Power Output |
| Maximum power output (EIAJ) @ 14.4V |
| 120 Watts x 4 or 300 Watts x 2 (bridged) |
| or 120 Watts x 2 + 300 Watts x 1 |
| Continuous Power Output - Watts RMS |
| @14.4V 20 ~ 20kHz into 4 Ohms 60W x 4 (0.2%) |
| @14.4V 20 ~ 20kHz into 2 Ohms 75 W x 4 (0.8%) |
| @14.4V Bridged into 4 Ohms 150W x 2 (0.8%) |
| CEA-2006 Amplifier Ratings |
| Power Output in Watts RMS @ 14.4 Volts |
| @14.4V 20 ~ 20kHz into 4 Ohms 60W x 4 (0.2%) |
| Bridged into 4 Ohms 150W x 2 (0.8%) |
| Signal-to-Noise ration 80dBA |
| Dynamic Power 60W @ 4 Ohms |
| Specifications and Features |
| RCA and Speaker Level Input |
| PWM Regulated Power Supply with MOSFET switching |
| Screw-type power/ground/speaker terminals |
| High performance balanced isolator circuit |
| LPF (Low Pass Filter) : 80Hz, -12dB/oct. |
| RCA Input : 400mV ~ 6.5 Volts |
| RCA Output (Full Range) |
| HPF (High Pass Filter): 80 Hz, -12dB/oct. |
| Frequency Response: 10 ~ 50,000 Hz(+0dB, -1dB) |
| Total Harmonic Distortion(THD) : < 0.01% (10W/1kHz) |
| Signal to Noise (S/N) Ratio (IEC-A Network) : > 95dB |
| Load Impedance per channel : 2ohms ~ 8ohms |
| Average Current Consumption (4Ohms, 4-channels driven) : 9.0A |
| Amplifier Fuse Rating : 25 Amps x 2 |
| Separation (@1kHz) : 70dB |
| Amplifier Dimensions |
| 300 x 60 x 334mm |
| Mass : 4.1Kg |
Shopping Cart
Email to a Friend
Print this page
